Mitel SX-200 Documentation page 342

Press RELEASE to terminate.
To review-
Dial x211 + the account code + * for each successive account
l
code. (For 12-digit codes, press # to see all the digits.)
Press RELEASE to terminate.
l
To temporarily suspend-
Dial x212 + the account code + #. A 1 will appear in the SOURCE
l
display to indicate in service; a 0 will appear for suspended
service.
Press RELEASE to terminate.
l
To remove temporary suspension-
Dial x212 + the account code + *. A 1 will appear in the SOURCE
l
display to indicate in service; a 0 will appear for suspended
Press RELEASE to terminate.
l
To access the Feature from an external line:
Access the PBX on a specified DISA trunk - two ringback tones
l
are heard, then PBX dial tone is returned.
Dial the DISA Account Code - if the code verifies, the dial tone is
l
returned. If the code does not verify, the trunk is dropped.
Dial the required feature access code or an extension number -
l
complete call as required.
SECT I ON MITL9105/911
Page 287