Mitel SX-200 Documentation page 203

SECTION MITL9105,'9110-096-105-NA
. .
Page 148
Assign access codes to Features: 3 (Call Forward - Busy), 4 (Call
l
Forward - Don't Answer), 5 (Call Forward - Follow Me) and 46
(Call Forward - Busy/Don't Answer).
Select System Option 107 (Attendant CO to CO Trunk Connect)
l
to allow the Attendant to connect incoming CO trunks to exten-
sions with ECF.
Operation
To set up External Call Forwarding at an Extension:
Lift the handset - dial tone is heard.
Dial the Call Forward access code.
l
Dial the System Speed Call access code.
l
Dial the Speed Call table entry number, which contains the ex-
l
ternal telephone number to which calls are to be forwarded.
Dial tone is returned if the above codes are valid. (Reorder tone
l
is heard if the codes are invalid.)
Replace the handset - External Call Forwarding is now active.
l
To set up External Call Forwarding from the Console:
Dial x 11 nnn (where nnn is the extension number).
l
Dial Call Forward access code (I, 2, 3, 4).
l
Dial the System Speed Call access code.
l
Dial the Speed Call table entry number, which contains the ex-
l
telephone number to which calls are to be forwarded.
Reorder tone is heard if the codes are invalid.
l
Press RELEASE button.
l
To cancel External Call Forwarding at an Extension:
Lift the handset - dial tone is returned.
l
Dial the Call Forward access code.
l
Replace the handset - External Call Forwarding is now inactive.
l
To cancel External Call Forwarding from the Console:
Dial % 11 nnn (where nnn is the extension number).
l
Dial #.
l
Press RELEASE button.
l