Mitel SX-200 Documentation page 754

SECTION MITL9105/911 O-096-SOO-NA
. . . .
:
c
TABLE 6-3
ATTENDANT FUNCTION ACCESS CODES
These codes assume the use of * as the Attendant .Function code (Feature Number 18). For
Attendant Function codes used in Traffic Measurement, see Section MITL9105/91 lo-096-450-NA.
To cancel all call forwarding:
(a) Dial XI, or ~11
(b) Dial #
(c) Press RELEASE button.
To access an individual trunk
(a) Dial ~20
(b) Dial individual trunk access number
(equipment number)
(c) Dial x
(d) Press RELEASE button.
To make trunk group extension and
Attendant access:
(a) Dial 36
(b) Dial trunk group (1 through 10)
(c) Dial #
(d) Press RELEASE button.
To change the Direct Inward System Access
Code:
(a) Dial ~7
(b) Dial DISA code
(c) Press RELEASE button.
To force-release an individual trunk:
(a) Dial ~20
(b) Dial individual trunk access number
(equipment number)
(c) Dial ##
(d) Press RELEASE button.
To cancel a minor alarm (Note 1):
(a) Dial ~8
(b) Dial #
(c) Press RELEASE button.
To make flexible night service assignments
(Note 3):
(a) Dial ++3
(b) Dial individual trunk access number
(equipment number)
(c) Press NIGHT 1 or NIGHT 2
(d) Dial extension number
(e) Press RELEASE button.
To cancel all system callbacks:
(a) Dial ~4
(b) Dial #
(c) Press RELEASE button.
To busy out an individual trunk (Note 3):
(a) Dial #9
(b) Dial individual access number
(equipment number)
(c) Dial x
(d) Press RELEASE button.
.
To debusy an individual trunk (Note 3):
(a) Dial ++9
(b) Dial individual trunk access number
(equipment number)
(c) Dial #
(d) Press RELEASE button.
To set the clock time:
(a) Dial ++5
(b) Dial time (Z-digit hour plus 2-digit
minutes)
(c) Dial ++ for PM; otherwise AM
(d) Press RELEASE button.
To make trunk group Attendant access only:
(a) Dial ~6
(b) Dial trunk group (1 through 10)
(c) Dial *
(d) Press RELEASE button.
To change the status of all occupied clean
rooms to occupied and needs cleaning:
(a) Dial ~10
(b) Dial JC
(c) Press RELEASE button.
To change the status of all occupied rooms
in the need of cleaning to occupied clean:
(a) Dial xl0
(b) Dial #
(c) Press RELEASE button.
Page 49