Mitel SX-200 Documentation page 191

DO NOT DISTURB
Description
An Attendant or extension may set up or cancel Do Not Disturb for an
extension.
Conditions
Automatic Wake-Up will override Do Not Disturb.
l
For an extension to be included in the total number of Do Not
l
Disturbs set (see Do Not Disturb Display), that extension must be
assigned to a busy lamp.
For the Attendant to set up Do Not Disturb for an extension, the
l
GUEST ROOM button must be enabled (see GUEST ROOM But-
ton).
Executive Busy Override is not effective on Do Not Disturb.
l
Programming
Select System Option 187_(Do Not Disturb Enable).
l
The extension's Cfass of Service must include Option Number 78
l
(Room Do Not Disturb Enable).
To intercept to the Attendant, a call to an extension with Do Not
l
Disturb in effect, select System Option 138 (Intercept to AK-Do
Not Disturb).
To display all extensions with Do Not Disturb, select System
l
Option 1s (Attendant Do Not Disturb and Message Waiting Dis-
play).
Assign a Feature code to Feature Number 24 (Room Do Not
l
Disturb).
Select System Option 187 (Do Not Disturb Enable).
l
Operation
To set up Do Not Disturb from the console:
Press GUEST ROOM button.
l
Dial the extension number - SOURCE display shows extension
l
number and Message
Room Status.
Press DO NOT DSTB button - extension busy lamp lights for the
l
duration of Do Not Disturb.
Press RELEASE button - Do Not Disturb in effect.
l
To cancel Do Not Disturb from the console:
Press GUEST ROOM button.
l
Dial the extension number - SOURCE display shows extension
l
number and Message
Room Status.
SECTION MITL9105/9110-096-105-NA
Register; DESTINATION
Register; DESTINATION
display shows
display shows
Page 137