Mitel SX-200 Documentation page 95

ATTENDANT NON-CO TRUNK - NON-CO TRUNK CONNECT ENABLE
Description
This option allows the Attendant to connect a Non-CO Trunk call to
another Non-CO Trunk, then release the call from the console. See
End-of-Dial Signal for Outgoing Trunks.
Conditions
Two or more trunks may be connected together in a Attendant-
l
Controlled Conference.
At least one of the trunks must provide release supervision, or
l
the trunk connection will not automatically release from the
system when the call is completed.
Programming
Select System Option 109 (Attendant Non-CO Trunk - Non-CO
l
Trunk Connect Enable).
System Option 109 may be selected in conjunction with System
l
Options 107 (Attendant CO Trunk - CO Trunk Connect Enable)
and 108 (Attendant CO Trunk - Non-CO Trunk Connect Enable).
Operation
After answering an incoming Non-CO Trunk call, or establishing a
Non-CO outgoing trunk call:
Dial the access code of the required Non-CO Trunk.
l
Dial the required number.
l
Wait for the called party to answer.
l
Press the RELEASE button - the two trunks are connected to-
l
gether.
SECTION MITL9105/9110-096-105-NA
Page 41