Mitel SX-200 Documentation page 313

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

SECTION MITL9105/9110-096-105-NA

SWITCHHOOK-FLASH TIMER

This feature defines the maximum duration of a switchhook flash. An

on-hook condition of longer than 200 ms will be considered by the

software as a valid on-hook (disconnect). An on-hook condition of less

than 190 ms is filtered by the line circuit hardware, and is not detected

by the software. The maximum duration of a valid flash condition may

be selected to be between the limits of 700 ms, 900 ms, 1100 ms or

Select System Option 189 for a maximum flash time of 700 ms.

Select System Option 190 for a maximum flash time of 900 ms.

Select System Option 191 for a maximum flash time of 1100 ms.

If none of these options are selected, a maximum flash time of

1500 ms is in effect.

Chapters

Table of Contents