Mitel SX-200 Documentation page 179

DIRECT-IN LINES
Description
This feature allows incoming trunks to be assigned to a specific exten-
sion or Hunt Group. incoming calls from the trunk ring the extension
(or Hunt Group) directly. The calls do not appear at the Attendant
Console. if the assigned extension is busy when a call arrives, the call
will be camped on. If ail extensions of a Hunt Group are busy, the call
will be queued. in no case will the call be answered, therefore the
caller will hear ringback tone from the CO. Camp-on tone will be heard
by an extension which is camped onto. if a. Hunt Group is camped
onto, no tone is heard. All Call Forwarding features may be activated
on incoming trunk calls to extensions.
Conditions
Camp-On Recall and Don't Answer Recall to the Attendant are
l
not active on Direct-In Line calls.
During Night Service, incoming calls will be directed to the night
l
assignment of the trunk
if a Direct-in Line call is handled by the Attendant as the result
l
of a transfer, it will then recall to the Attendant in Day or Night
Service.
Programming
Specify the Day, Night 1 or Night 2 assignments of the trunk as
l
the equipment number of the extension or the Hunt Group num-
ber to which the trunk is to be assigned.
The trunk type must be Type 1 (Standard Bothway CO Trunk), or
l
5 (Non-Dial-in Tie Trunks).
Operation
None
SECTION MITL9105/9110-;096-105-NA
Page 125