Mitel SX-200 Documentation page 82

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

SECTION MITL9105/9110-096-105-NA

The Attendant may flash on a CO trunk by pressing the FLASH button.

After the flash the attendant may dial as required.

System Option 121 (Attendant Button Change Flash to Serial Call)

must be disabled.

The attendant may flash on incoming or outgoing trunks.

The attendant may dial a maximum of 26 digits after a flash.

The flash duration is approximately 200 ms.

While the attendant is connected to a trunk:

Press the FLASH button

Dial as required.

Chapters

Table of Contents