Mitel SX-200 Documentation page 240

MESSAGE WAITING DISPLAY
Description
This feeare allows the Attendant to display all extensions that have a
message waiting. When the Attendant presses and holds the MSGE
WAIT button, the busy lamp field goes dark, leaving only the lamps lit
for the rooms that have a messsage waiting. In addition, the SOURCE
display shows the total number of extensions with a message waiting.
Conditions
The console must be idle. If the console has an extension as its
l
Source or Destination party or is using the GUEST ROOM button,
the Message Waiting status for that extension will be changed.
For an extension to be included in the total display of the Busy
l
Field Lamps and the total amount in the SOURCE display, it must
heve a lamp assigned a Message Waiting.
Programming
Select System Option 112 (Attendant Do Not Disturb and Mes-
l
sage Waiting Display).
Operation
To display the total number of extensions with Message Waiting set:
Press the MSGE WAIT button - the busy lamp field changes to
l
display only the extensions that have a Message Waiting active;
the SOURCE display shows the total number of extensions with a
message waiting.
l
SECTION MITL9105/9110-096-l OS-NA
Page 185