Mitel SX-200 Documentation page 38

SECTION MITL91
Page 32
10-096-l 00-NA
Single button feature activation.
Multiline appearances (installer-programmed) of up to 15 lines
including primary line (set directory number). Multiline appear-
ances may be a mixture of PABX lines and trunks, and may also
be multi-appearances of same line.
Speed call entry at each unassigned line.
Automatic selection of primary line.
Pushbutton selection of nonprimary line.
Automatic ringing line selection (PABX programmed option).
Hold function for any call at the set.
User programming of timed reminder, call forward destination
number, speed call entry and messages.
Handsfree operation, with switchable microphone.
Volume controls for ringer and loudspeaker.
Ringer pitch control.
Installation features
Turn-key installation. Connection to local area wiring by means
of a modular jack.
Ease of installation. Power, signaling, and voice carried over a
single pair. Additional pair required only if Call Announce ser-
vice is set up.
User impact
User confidence in handling incoming or outgoing calls,
through application of visual word prompts automatically dis-
played on an LCD. These prompts signify all valid call-handling
options at any given time.
User capability to make the fullest use of all PABX features in
his Class of Service, by means of the visual word prompts
mentioned above.
Physical Description
The SUPERSET 4 body and handset are of plastic construction.
9.02
The dimensions of the SUPERSET 4 set, with handset on-hook,
are given in Figure 9-1. The body and handset are interconnected via a
modular detachable handset cord, plugged into the side of the body.
Line connection to the set is by means of a modular detachable line
cord, plugged into the rear of the set. An optional rear support can be
clipped in position beneath the set. This would be used when the set is
likely to be placed some distance from the user.
Body
The body of the SUPERSET 4 set comprises two parts - a base
9.03
assembly and a cover assembly.