Mitel SX-200 Documentation page 97

ATTENDANT SERIAL CALL
Description
This feature allows the Attendant to have incoming trunk calls auto-
matically returned to the console when the original call is finished.
Conditions
Attendant Serial Call is available on all trunk calls.
l
This feature and System Option 113 (GUEST ROOM Button En-
l
able) are mutually exclusive.
This feature and System Option 119 (Attendant ROOM STATUS
l
Button Enable and Display Enable) are mutually exclusive.
This feature and System Option 121 (Attendant Button Change
l
Flash-to-Serial Call) are mutually exclusive.
Programming
Select System Option 120 (Attendant Serial Call).
l
Operation
To establish a Serial Call:
Answer an incoming LDN call.
l
Press the SERIAL CALL button.
l
Dial the required extension number.
Press the RELEASE button.
l
To answer a Serial Recall:
ANSWER and RECALL lamps flash.
l
Press the ANSWER button - ANSWER, RECALL, SOURCE and SE-
l
RIAL CALL lamps are lit. The Attendant is connected to the
recalling trunk
To cancel a Serial Recall:
ANSWER and RECALL lamps flash.
l
Press the ANSWER button - ANSWER, RECALL, SOURCE and SE-
l
RIAL CALL lamps lit.
Press the SERlAL CALL button; SERIAL LED goes out. If the call is
l
subsequently connected to another station, it will not recall.
SECTION MITL9105/9110-096-105-NA
Page 43