Mitel SX-200 Documentation page 680

SECTION MITL9195/9110-096-451-NA
trunk to be analyzed for costing purposes. If an extension dials a trunk,
talks to it, then transfers it to another extension, only one call record is
generated. However, the number of the second extension appears in
the record.
Recorded Information
::.
t/t
::
SMDR data which is recorded provides information on the fol-
lowing items:
Outgoing, and incoming calls.
Digits dialed on the trunk (maximum capacity 26 digits).
Account Codes of up to 12 digits.
Meter Pulses (option).
Outgoing and incoming trunk numbers.
System Identity (option).
Long calls identified (with programmed durations).
Time to answer for incoming calls.
Identifies second extension in a transfer.
Identifies conferences and transfers.
Records answer supervisions.
Indicates if the attendant was involved in the call.
The data is output at the RS-232 port (Part 3), and each record
occupies an 80-character row. If it is also required to print out
the System Identifier, then System Option 283 (Table 4-1) must be
enabled, and the row increases to 84 characters in length. If the
Account code is of eight digits or less, the line length will be 88
characters.
2.04 A description of each field which appears in an SMDR record is
shown below, and the complete group of fields is summarized
in Table-2-l. This Table includes information with regard to the field
symbols used in the following descriptions:
,:.
::;
_'
0
Long Call Indicator.
This optional field contains a ti-ti for calls
. of duration 5 to 14 minutes 59 seconds, a "OX," for calls of
duration 15 to 29 minutes 59 seconds, and a "+" for calls of 30
or more minutes. This is useful when records are to be man-
ually scanned.
0
Date (mm/dd).
The date is reported numerically as a 2-digit
month followed by a 2-digit day. The year is not reported.
Page 3