Technical Specifications; Vehicle Identification Data - Seat Mii 2015 Owner's Manual

Technical specifications

Technical features
Important information
Introduction
The information in the vehicle documentation
always takes precedence over the informa-
tion in this Instruction Manual.
All technical specifications provided in this
documentation are valid for the standard
model in Spain. The vehicle data card inclu-
ded in the Maintenance Programme or the
vehicle registration documents shows which
engine is installed in the vehicle.
The figures may be different depending
whether additional equipment is fitted, for
different models, for special vehicles and for
other countries.
Technical features
Abbreviations used in the Technical
Specifications section
Abbrevi- Meaning
ation
kW Kilowatt, engine power measurement.
Pferdestärke (horsepower), formerly used
PS
to denote engine power.
rpm Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
litres per Fuel consumption in litres per 100 km (70
100 km miles).
Carbon dioxide emissions in grams per km
g/km
(mile) travelled.
CO Carbon dioxide
2
Cetane number, indication of the diesel
CN
combustion power.
Research octane number, indication of the
RON
knock resistance of petrol.

Vehicle identification data

Vehicle data label.
Fig. 155
Vehicle identification number.
Fig. 156
Vehicle identification number
The vehicle identification number (chassis
number) can be read from outside the vehicle
through a viewer in the windscreen
›››
Fig. 156. This viewer is located in the lower
»
197