External Data Storage Connected To Usb Port; Playing Via Bluetooth; Requirements - Seat Mii Electric Owner's Manual

storage device from the system, the function
button becomes inactive (grey colour).
Now you can remove the SD card.
●
External data storage connected to
USB port

Depending on the country and device, there
might be one or several USB ports
vehicle.
The location of the USB ports
the vehicle in question .
Audio files on an external data storage device
connected to the USB port
and controlled via the Infotainment system.
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio files,
such as MP3 players, iPods™ and USB sticks.
Only compatible audio files are displayed.
Other files are ignored.
The rest of operations to use the external da-
ta device storage (changing tracks, selecting
tracks and enabling playback modes) are
carried out similarly to other audio sources
(e.g. "Playback from SD card"
128
Instructions and restrictions
The number of USB ports
patibility with Apple™ devices as well as with
other media players depends on the features.
The USB port
age of 5 volts for a USB connection.
Due to the large number of different data
storage devices and various iPod™ and
iPhone™ generations available, it is not possi-
in the

ble to guarantee fault-free operation of all
functions described here.
depends on

Take into account all other instructions and
limitations regarding requirements for media
sources.
can be played

Disconnecting
Connected data storage devices must be
prepared before their disconnection in order
to remove them.
Press the Infotainment button
●
then press
Select
●
SD Card

storage device from the system, the function
button becomes inactive (grey colour).
Now the data storage device can be dis-
●
›››
page 127.
connected.
Infotainment System
and their com-

supplies the usual USB volt-

and

.
System settings
and then
Remove source safely
. After correctly ejecting the data
®

Playing via Bluetooth

*
Connection of a safe audio source through
Bluetooth
Bluetooth Audio mode allows you to listen to
®
audio files being played on a Bluetooth
dio source (e.g., a mobile telephone) connec-
ted via Bluetooth (audio playback by Blue-
®
tooth ® ) over the vehicle speakers.

Requirements

The Bluetooth® audio source must support
●
the A2DP Bluetooth profile.
®
In the Bluetooth Settings menu the
●
BT Audio (A2DP/AVRCP) function

Starting Bluetooth audio transmission
®
Activate Bluetooth ® visibility on the external
●
Bluetooth audio source (e.g., mobile tele-
®
phone).
Lower the base volume on the Infotainment
●
system.
Press the button .
●

Press the function button to select Blue-
● 
tooth as a media source.
®
Start searching for the desired Bluetooth
●
device.
Please refer to the instructions on the Info-
●
tainment system display and on the Blue-
tooth audio source regarding the rest of the
®
procedure.
® au-
must be on.
®