<Sysname> display line summary
Line type : [AUX]
16:XXXX XXXX XXXX XXXX
Line type : [VTY]
32:UUXX XUXX XXXX XXXX
48:XXXX XXXX XXXX XXXX
64:XXXX XXXX XXXX XXXX
80:XXXX XXXX XXXX XXXX
3 lines used.
93 lines not used.
Table 9 Command output
Fields
Line type
number:status
display telnet client
Use
display telnet client
Syntax
display telnet client
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
This command displays the source IPv4 address or source interface specified for the Telnet client to
use in outgoing Telnet packets, depending on the
Examples
# Display the packet source setting for the Telnet client.
<Sysname> display telnet client
The source IP address is 1.1.1.1.
Related commands
telnet client source
display user-interface
Use
display user-interface
0:XXXX XXXX XXXX XXXX
(U)
(X)
Description
Type of the user line:
•
AUX—AUX line.
•
VTY—VTY line.
number: Absolute number of the first user line in the user line class.
status: User line status. X is for unused and U is for used.
to display the packet source setting for the Telnet client.
telnet client source
to display user line information.
53
command.