Download  Print this page

Using Qos Types To Configure Qos For Outbound Traffic; Viewing The Qos Configuration - HP ProCurve Series 2810 Management And Configuration Manual

Procurve series 2810 switches.
Hide thumbs

Advertisement

Quality of Service (QoS): Managing Bandwidth More Effectively

Using QoS Types To Configure QoS for Outbound Traffic

N o t e
6-18
Using QoS Types To Configure QoS for
Outbound Traffic
QoS Feature
UDP/TCP Priority
IP-Device Priority
IP Type-of-Service Priority Disabled
VLAN-ID Priority
Interface (Source-Port)
Priority
In addition to the information in this section on the various QoS types, refer
to "QoS Operating Notes and Restrictions" on page 6-66.

Viewing the QoS Configuration

Examples of the show qos output are included with the example for each
priority type.
Syntax: show qos < priority-type >
tcp-udp-port-priority
Displays the current TCP/UDP port priority
configuration. Refer to figure 6-8 on page 6-26.
device-priority
Displays the current device (IP address) priority
configuration. Refer to figure 6-9 on page 6-29.
type-of-service
Displays the current type-of-service priority
configuration. The display output differs according to
the ToS option used:
Default
Menu
Disabled
Disabled
Disabled
Disabled
IP Precedence: Refer to figure 6-13 on page 6-34.
Diffserve: Refer to figure 6-15 on page 6-38.
CLI
Web
page 6-20 Refer to Online Help.
page 6-27
"
page 6-33
"
page 6-46
"
page 6-52
"

Advertisement

Table of Contents

   Related Manuals for HP ProCurve Series 2810

   Related Content for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: