Source-Deny (Mld-Snooping View) - HP 6125G Command Reference Manual

Description
Use router-aging-time to set the aging timer for dynamic router ports globally.
Use undo router-aging-time to restore the default.
By default, the aging time of a dynamic router port is 260 seconds.
This command works only in MLD snooping–enabled VLANs.
Related commands: mld-snooping router-aging-time.
Examples
# Set the aging timer for dynamic router ports to 100 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] router-aging-time 100

source-deny (MLD-snooping view)

Syntax
source-deny port interface-list
undo source-deny port interface-list
View
MLD-snooping view
Default level
2: System level
Parameters
interface-list: Specifies a list of ports. You can specify multiple ports or port ranges by providing the this
argument in the form of interface-list = { interface-type interface-number [ to interface-type
interface-number ] }, where interface-type is the port type and interface-number is the port number.
Description
Use source-deny to enable IPv6 multicast source port filtering, namely, to filter out all the received IPv6
multicast packets.
Use undo source-deny to disable IPv6 multicast source port filtering.
By default, IPv6 multicast source port filtering is disabled.
This command works in both MLD snooping–enabled VLANs and VLANs with MLD enabled on their
VLAN interfaces.
Examples
# Enable source port filtering for IPv6 multicast data on interfaces GigabitEthernet 1/0/1 through
GigabitEthernet 1/0/4.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] source-deny port gigabitethernet 1/0/1 to gigabitethernet 1/0/4
250