Router-Aging-Time (Mld-Snooping View); Source-Deny (Mld-Snooping View) - HP 6125XLG Command Reference Manual

router-aging-time (MLD-snooping view)

Use router-aging-time to set the global aging timer for dynamic router ports.
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The default setting is 260 seconds.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
interval: Specifies an aging timer (in seconds) for dynamic router ports, in the range of 1 to 1000.
Usage guidelines
The global configuration is effective on all VLANs, but has a lower priority than the configuration made
in a specific VLAN.
Examples
# Set the global aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] router-aging-time 100
Related commands
mld-snooping router-aging-time

source-deny (MLD-snooping view)

Use source-deny to enable IPv6 multicast source port filtering on a specified port to filter out all the
received IPv6 multicast data packets. This allows the port to connect to only IPv6 multicast receivers rather
than to IPv6 multicast sources.
Use undo source-deny to disable IPv6 multicast source port filtering.
Syntax
source-deny port interface-list
undo source-deny port interface-list
Default
IPv6 multicast source port filtering is disabled on a port, and the port can connect to both IPv6 multicast
sources and IPv6 multicast receivers.
122