Mld-Snooping Max-Response-Time - HP 6125XLG Command Reference Manual

The configuration made in VLAN view is only effective on the current VLAN and takes preference over the
global configuration.
Examples
# Enable MLD snooping for VLAN 2 and set the MLD last-listener query interval to 3 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping last-listener-query-interval 3
Related commands
last-listener-query-interval (MLD-snooping view)
•
• mld-snooping enable

mld-snooping max-response-time

Use mld-snooping max-response-time to set the maximum response delay for MLD general queries in the
VLAN.
Use undo mld-snooping max-response-time to restore the default.
Syntax
mld-snooping max-response-time interval
undo mld-snooping max-response-time
Default
The default setting is 10 seconds.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interval: Sets the maximum response delay (in seconds) for MLD general queries, in the range of 1 to 25.
Usage guidelines
You must enable MLD snooping for a VLAN before you configure this command for the VLAN.
The configuration made in VLAN view is only effective on the current VLAN and takes preference over the
global configuration.
Examples
# Enable MLD snooping for VLAN 2 and set the maximum response delay for MLD general queries to 5
seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
114