Table of Contents
Advertisement
•
Active = Saved—when this option is enabled, the active configuration of
logical port addresses is used when the IPL configuration file is updated. If a
check mark displays, the Active = Saved option is enabled.
3. Select the appropriate country code page from the following Code Page list box,
as shown in
Table 2–3: Code Page Choices
Code Page Name
United
States/Canada
Germany/Austria
Brazil
Italy
Japan
Spain/Latin
America
United Kingdom
France
International #5
4. Click Activate to enable changes and allow or prohibit FICON host control.
Task 11: Set Switch Date and Time
The Edge Switch 2/32 Product Manager log entries are stamped with the date and time
received from the switch. To set the effective date and time for the switch:
1. At the Hardware View page for the selected switch, choose Configure >
Date/Time. The Configure Date and Time dialog box displays, as shown in
Figure
2–17.
The switch date and time can be set manually, or set to be periodically updated by
the HAFM application (the switch and HAFM application synchronize at least
once daily).
edge switch 2/32 installation guide
All manuals and user guides at all-guides.com
Table
2–3.
Code
Page
00037
00273
00275
00280
00281
00284
00285
00297
00500
Installing and Configuring the Edge Switch 2/32
2-21
Advertisement
Table of Contents
