Replacing Smb Battery - ABB Robotics IRB 4600 Manual

Table of Contents

Advertisement

3.4.8 Replacing SMB battery

Product manual - IRB 4600
3HAC033453-001 Revision: Y
Note
The battery low alert (38213 Battery charge low) is displayed when the battery
needs to be replaced. The recommendation to avoid an unsynchronized robot
is to keep the power to the controller turned on until the battery is to be replaced.
For an SMB board with 3-pole battery contact (RMU101 3HAC044168-001 or
RMU102 3HAC043904-001), the lifetime of a new battery is typically 36 months.
For an SMB board with 2-pole battery contact, the typical lifetime of a new battery
is 36 months if the robot is powered off 2 days/week or 18 months if the robot is
powered off 16 h/day. The lifetime can be extended for longer production breaks
with a battery shutdown service routine. See Operating manual - IRC5 with
FlexPendant for instructions.
WARNING
See
Hazards related to batteries on page
© Copyright 2009-2021 ABB. All rights reserved.
3 Maintenance
3.4.8 Replacing SMB battery
37.
Continues on next page
179

Advertisement

Table of Contents
loading

Table of Contents