Table of Contents
Advertisement
2 Installation and commissioning
2.5.1 Installation of cooling fan for motors (option)
Continued
xx0900000137
A
B
C
D
Required equipment
Equipment
Cooling fan axis 1, set
Cooling fan axis 2, set
Locking liquid
Standard toolkit
Circuit diagram
Other tools and procedures
may be required. See refer-
ences to these procedures
in the step-by-step instruc-
tions below.
Continues on next page
84
Fanbox (motor axis 1)
Groove in the connector
Back plate
Part of the fanbox that can be removed, if needed.
Article number
-
-
-
-
-
© Copyright 2009-2021 ABB. All rights reserved.
Note
For Spare part no. see chapter Spare
parts, section:
•
Spare part lists on page 391
For Spare part no. see chapter Spare
parts, section:
•
Spare part lists on page 391
Loctite 243. Used for the three tightening
screws.
Content is defined in section
tools on page
385.
See chapter
Circuit diagram on page
These procedures include references to
the tools required.
Product manual - IRB 4600
3HAC033453-001 Revision: Y
Standard
393.
Advertisement
Table of Contents
