ABB Robotics IRB 4600 Manual page 243

18
Refitting the base
Use this procedure to refit the complete arm system to the base.
1
2
3
4
Product manual - IRB 4600
3HAC033453-001 Revision: Y
Action
Remove the support legs attachments
screws and remove the base from the sup-
port legs.
Action
CAUTION
The weight of the base is 49 kg
All lifting accessories used must be sized
accordingly.
Fit three lifting eyes to the base and secure
with roundslings in an overhead crane or
similar.
Fit the new base to the support legs and
secure with the attachment screws.
Remove residues of old Loctite and other
contaminations from surfaces before apply-
ing new Loctite 574.
© Copyright 2009-2021 ABB. All rights reserved.
4.3.5 Replacing the base
Note
xx1800000885
Note
Lifting eye: M8
xx1800000885
Tip
Use Loctite 7063 (or similar) for cleaning.
Continues on next page
4 Repair
Continued
243