Table of Contents
Advertisement
2 Installation and commissioning
2.2.1 Pre-installation procedure
2.2 Unpacking
2.2.1 Pre-installation procedure
Introduction
This section is intended for use when unpacking and installing the robot for the
first time. It also contains information useful during later re-installation of the robot.
Prerequisites for installation personnel
Installation personnel working with an ABB product must:
Checking the pre-requisites for installation
1
2
3
4
5
6
7
8
9
10
11
Weight, robot
The table shows the weight of the robot.
Robot model
IRB 4600
Continues on next page
44
•
be trained by ABB and have the required knowledge of mechanical and
electrical installation/maintenance/repair work
•
conform to all national and local codes.
Action
Make a visual inspection of the packaging and make sure that nothing is damaged.
Remove the packaging.
Check for any visible transport damage.
Note
Stop unpacking and contact ABB if transport damages are found.
Clean the unit with a lint-free cloth, if necessary.
Make sure that the lifting accessory used (if required) is suitable to handle the weight
of the robot as specified in:
If the robot is not installed directly, it must be stored as described in:
tions, robot on page 47
Make sure that the expected operating environment of the robot conforms to the
specifications as described in:
Before taking the robot to its installation site, make sure that the site conforms to:
•
Loads on foundation, robot on page 45
•
Protection classes, robot on page 47
•
Requirements, foundation on page 46
Before moving the robot, please observe the stability of the robot:
bility on page 52
When these prerequisites are met, the robot can be taken to its installation site as
described in section:
On-site installation on page 54
Install required equipment, if any.
•
Installation of signal lamp (option) on page 77
© Copyright 2009-2021 ABB. All rights reserved.
Weight, robot on page 44
Operating conditions, robot on page 47
Weight
440 kg
Storage condi-
Risk of tipping/sta-
Product manual - IRB 4600
3HAC033453-001 Revision: Y
Advertisement
Table of Contents
