Replacing Parts On The Panels; Replacing The Manipulator Signal Connector (Smb) - ABB Robotics OmniCore C90XT Product Manual

5 Repair

5.3.1 Replacing the manipulator signal connector (SMB)

5.3 Replacing parts on the panels

5.3.1 Replacing the manipulator signal connector (SMB)
Location
The illustration shows the location of the manipulator signal connector.
xx1900001476
Required spare parts
Spare part
Harness Single SMB connection
Harness Double SMB connection
Continues on next page
294
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
Article number Note
3HAC069674-001 Harness single SMB
3HAC069675-001 Harness double SMB
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E