Datacabinet 9000; Description - Mitel SX-200 Practices

m .
17 .
DATACABINET 9000
DESCRIPTION
Only Mite1 designed and approved equipment may be instaIled within a DATA-
CABINET 9000.
;
The DATACABINET 9000, part number 9141-900-I OO-NA, is a fre&standing metal
cabinet approximately 60 cm x 60 cm x 98 cm high (24 inches by 24 inches by 39 inches
high). it has locking doors at the front and the rear, and contains rails inside for mounting
data shelves and other equipment. Only MITEL designed and approved equipment is
to be installed in the DATACABINET 9000.
Figure 17-I
shows the front view of the cabinet, with the door open, and a
configuration of three DATASHELF 9100 assemblies and a Modem Interconnect
Panel. Figure 17-2 shows a rearview of the cabinet interior with cables installed. Each
shelf also has a 26-pair connectorized cable which connects to the PABX MDF, and
one ac power cord.
The cabinet is mounted on four casters. The Power Distribution Unit (PDU) rear panel,
shown in Figure 17-2, contains entrances for power and communication cables.
Inside, on the left, is a power distribution panel for distributing power to equipment
within the cabinet.
9109-096-126-NA
Issue
1
Revision
0
126 17-l