PEUGEOT 504 Series 1970 Workshop Manual page 71

Fig. I
Fig. II
ENGINE
TIMING
REASSEMBLY · SETTING
- Without altering the pos1t1on of the crankshaft, fit
· the woodruff key
the sprocket
- Position the camshaft and the crankshaft, in that
order.
as
shown opposite (fig. t).
- Install the chain on the camshaft sprocket then the
assembly on the crankshaft sprocket (fig.
II).
WARNING - The reference marks on the two
sprockets must be in line and o n the axes of the
aankshaft and camshaft.
- Fil
a new tab washer on the camshaft sprocket
- Tighten the bolts to 2 .25 m.kg (16 ft .lbs).
- 81md the tab washer up around the bolt heads
Reno Id Tensioner.
Insert the filter .
Fit the tensioner
load it by turning the allen key clockwise.
Fit a new tab washer on the plug and tit the plug
Bend the tab up around the plug head
For KF 6 • KF 5 and XN 2 engines : assemble the
tensioner. install the retaining toot. load tt and fit
the plug and tab washer before fitting the tensione1
on tho block.
- Withdraw the tool when the tens1on€J" is installed.
WARNING · Never assist the tensioner action .
WWW.!::::. c:J Cl .OrG