PEUGEOT 504 Series 1970 Workshop Manual page 527

BODYWORK
REFITTING
• Reposition the car on its wheels.
·Fit the following :
·engine support bar Bond tighten the bolts.
·both thrust shims C between silentbloc eyes
of triangle arms and the bosses of the front
steering knuckle connecting rods.
·Remove :
• the four securing bolts from the main cross
member,
• the
c;
1
x bolts of the front cross member.
- Remove the six front suspension elements
securing bolts from the wing valances.
- Place a second hoist chain at the rear of the
car.
·Raise the bodywork using the two hoist
chain.
·Raise simultaneously to allow for disengage-
ment of the mechanical components.
- Temporarily secure the steering geor housing
(Steering box) to the main cross member.
WWW.
Ea~
lllC'.:l .orG
I
I