PEUGEOT 504 Series 1970 Workshop Manual page 506

I
0
w
~
::;)
w
a.
'
REAR SUSPENSION
REAR SHOCK ABSORBERS
(
(
REPLACEMENT OF A FLEXIBLE BUSH ING
REMOVAL
- Assemble the following on the press base
plate :
- fitting tool M,
- shock absorber eye 1,
- removal drift
N
with the smaller diameter
pointing towards the shock absorber.
- Lower the piston until the silentbloc falls
inside
tool M.
REFITTING
- Smear the silentbloc outer surface and the
shock absorber eye bore with tallow.
- Assemble the following on the press base
plate :
-
fitting tool M,
- shock absorber eye
1,
- new si lentbloc 2 with chamfer pointing
toward s shock absorber eye .
- fitti ng dr ift
N
with its greater diameter poin-
ting towards the shock absorber .
- Lower piston, using the press, until drift
N
comes into contact with shock absorber eye.
- Corre ct positioning of the sile ntbloc 1s ensured
by the shape of drift
N
504 Workshop Monuol ·Rei. 1212 E