PEUGEOT 504 Series 1970 Workshop Manual page 263

1
-©
DIFFERENTIAL
DISMAN TL ING
• Remove the 8 ossembl ing bolts of the diffe·
rentiol.
- Remove the differential from the crown wheel
1.
- Recover the left hand side sun gear ond its
thrust washer.
- Place crown wheel on tool
C.
- Insert the 4 extractor clomp support rods H3
into four diometrolly opposed holes of the
crown wheel.
- Fit the extractor clomps
Hl
around the bearing
2.
- T ghten the "Allen" screws to 14.5 ft.lbs
(2 m.kg} using odoptor H4.
-
Place press pod H2 on the crown wheel
m the
centre of the bearing.
- Using o press, remove the crown wheel.
- Use the some procedure to remove right hand
side bearing of the differential case.
· Remove planet shaft lock pin
3
using o drif•
of
5
mm.
· Then remove :
- planet gear shaft 4
- planet gears 5
- spherical washers 6
- sun gear right hand side 7
- thrust washer 8
WVIW. ~~lllC:J . OrG