PEUGEOT 504 Series 1970 Workshop Manual page 617

1rn
4D
BODY BENCH
DESCRIPTION AND CHARACTERISTICS
504 · COUPE. CON VERTIBLE
ENS. 128.01
COMPOSITION OF THE ASSEMBL Y
A • Sole plate for supports B-C and towers DZ.
B • Supports for checking the front suspension crossmember holes.
C • Supports for checking the front main crossmember holes.
DZ • Telescopic towers with spacers for checking the upper front suspension mounting
E • Crosspiece for gouge F aid supports G-H.
F • Gouge for checking the gearbox tunnel.
G • Supporis for checking the front floor guide holes.
H • SupPorts for checking the position of the one piece sides.
J • Crosspiece for checking the rear guide holes in thebulkhead.
K • Crosspiece for supports M.
M • Supports for checking the rear front floor guide holes.
NOl •
Crosspiece for supports 0 . P.
0 • Supports for checking the rear suspension crossmember mounting holes.
P . Supports for checking the posi t ion of the one piece sides .
QO l •
Supports for checking the rear spr ing hou,,ings.
RO l •
R.H. support for the rear floor
SOl •
L.H. support for the rear floor with centering for the fuel filler tube.
u
v
w
Set of four
20
mm thick sol e plates.