PEUGEOT 504 Series 1970 Workshop Manual page 486

I
0
w
IJ
::;)
w
0.
FRONT SUSPENSION
SUSPEH~OH
ELEMEHT REMOVAL
- Raise the car by the front jock guides us ing
the b1ock and trockle chain hoist or o trolley
jock placed under the front cross member.
- Chock under each side of the front cross mem-
ber.
- Remove the whee I.
- Remove :
- the broke coliper and suspend it from the
bodywork without disconnecting 'he flexible
hose.
- the track rod boll joint using extractor
8.0703 E.
- the securing pivot of the anti-roll bar con-
necting link on the rear triangle arm.
- the rear triangle arm pivot by topping to
disengage the splined part.
- the s i lentb loc nut securing the front arm to
the rear arm.
- Place a jock under the wheel hub.
- Remove the three bolts securing the upper
spring holder to the wing valance.
- Hold the spring on one of its c oi Is.
- Lower the jock and remove the element from
the car.
504 W o rk shop Manua l • Re f. 12 12 E