PEUGEOT 504 Series 1970 Workshop Manual page 542

0
w
~
:J
w
Cl
8-70
BODYWORK - FRONT PART
REMOVAL AND REFITTING THE FRONT ASSEMBLY
REMOVING THE DETACHABLE PARTS
Disconnect the battery
• Remove
• The parking I ights
• The head I ights
- The front direction indicators
• The windscreen washer nozzles
- The grille
• The bumper
• The air intake panel
• The bodywork trims
INTERVENTION ON THE CAR
i
REMOVAL OF THE FRONT ASSEMBLY
! ·
Remove
From the upper part
The 4 screws from the L.H. wing
- The
4
screws from the bonnet front p:inel
• The
4
screws from the R.H. wing
From the lower part
• The
2
screwsfrom the R.H. wing
• The
3
screws from the panel
• The
3
screws from the cross member
• The
2
screws from the L.H. wing
- Remove the front assembly
PREPARATION ON THE CAR
- Remove the fi
11
er from :
- The front frame
- The winq valances
• The mud deflector
Check and if necessary replace the cage
nuts.
NOTE : The
cage
nuts which secure the bot-
tom of the wings
are
accessible
from
inside
the one piece sides, by removing the sidecard-
board panels.
""------------------------------------------------'-----------------------------------------~
504 Workshop Monuol - Rei: 1212 E.
WVIW.
!::a~
ICI .OrG