PEUGEOT 504 Series 1970 Workshop Manual page 509

Table of Contents

CROSS-MEMBER

· Place car over a pit or o car lift.

·Remove the rear nut securing the exhaust pipe

urder the bodywork.

·Remove the two securing clomps of the anti-roll

bar flexible bushings and disengage the bar

·Remove the two Allen screws securing the

differential to the suspension cross-member.

Rest the rear port of the connecting tube

rear cross-member.

• Slacken the

arm pivot nuts.

• Remove the petrol line rear securing clomp.

• Place a jock under the cross-member

Remove the rear seat cushion.

• Unlock the three securing nuts of

• Remove the front securing nut.

·Raise the lock washer.

• Remove the plastic plug from the guide hole.

in the hole.

1ghten using bar

IN THE GUIDE HOLE

• Remove the cross-member rear securing nuts

and the thrust washers.

• Lower the cross member unti I the bar comes

mto contact with the floor.

• Corry out the

operation on the right

Show Quick Links

Table of Contents