PEUGEOT 504 Series 1970 Workshop Manual page 203

GEARBOX
GEAR CHANGE CONTROLS
1 ·
Fitting the change link
·Place the lever 4 on the gearbox in "neutral"
·Fit the link 2 positioning the adjustable ball
socket as required
Hold the socket and tighten the lock nut.
2 • Fitting the selector I ink
·Make sure that the gear selector lever 5 is
in "neutral"
· Connect the fixed boll socket on the link 1
to the selector jock lever 6
· Push the link upwards as for as possible
and check the al inement of the
boll
joint
with the lever on the gearbox
· Corry out the necessary adjustment, acting
on the bottom bol I joint socket, pos it1oning
it correctly
• Hold the socket and tighten the lock nut
• Refit the return spring.
WVIW. E. CJ llCJ .OrG