PEUGEOT 504 Series 1970 Workshop Manual page 589

~
-----
J_
BOD YW OR K · REAR P A RT
I
REP LACll'IG A REAR W lt-I G
_ r_
ALI NING AND ASSEMBL Y
- Ali ning the edges
- Line up edge to edge :
1 st
- the crosspiece cutaway
2nd - the quarter panel cutaway
With the wing in position there should be o
maximum gap of l mm between the cutoway
edges.
• Al ining the wing
- Hold the quarter panel against the water drip
channel and the rear window lining,
- The front port should rest against the rear
door but tress.
- The lower edge should rest on the
whe~I edg~
have the same curve and rest on the base of
the one piece side.
- T he central part of the wing pane l should I ine
up that of the door.
• The angle of the boot I 1d and that of the wing
should be at the some level, the edges being
parallel with a minimum of clearance (r).
- Remove the wing and correct the alinement
where necessary.
WVIW.
!::a~
ICI .OrG