PEUGEOT 504 Series 1970 Workshop Manual page 342

0
w
"'
::;)
w
a.
FRONT AXLE
TRIANGLE ARMS
c
TOOLS TO BE USED
8.0906
Tool chest for front and rear suspension
B ·Steering swivel boll joint extractor.
C ·Socket head for steering swivel boll 101nt
housing closing nut, with three notches.
0 •
Socket head, for the steering swivel boll
joint housing closing nut, with three shoul-
ders.
F. C a stled socket head for lower boll joint
securing nut.
H • Supporting clamp.
H . Punch fpr locking the closing nut and the
front hub nut.
P. Punch for locking the steering swivel boll
joint securing nut.
N. B. • The tools 8.0906
C, D, F,
N, already
~xist,
for the 404 and Associated
vehicles,
under
references
8.0902 N, M, Al and K. They
~re
not delivered with this tool chest, bvt a
place is provided for them.
8 .0907
Tool chest for front and rear flexible bushes.
A • Nut and bolt for front triangle si lentblocs.
B • Removing and refitting drift for the bushing
support silent bi oc.
C · Removing and refitting drift for the triangle
front and rear arm s i lentbloc s.
0 ·
Removing and refitting cup for the front
triangle silentblocs.
E • Removing and refitting ring for the front
triangle rear arm silentbloc.
F • Removing and refitting ring for the bushing
support silentbloc.
504 Workshop Manuel·
R~I.
1212 E
WWW.
Ea~
llC:l .orG