PEUGEOT 504 Series 1970 Workshop Manual page 522

I
b
w
~
~
w
0..
PRELIMINARY OPERATIONS
BODYWORK
REMOVAL
Place the car over o pit or on o car lift.
Protect the wings w1 th the covers.
Disconnect the battery.
Drain the cooling system and recover the liquid if it contains anti-freeze.
- Remove the battery.
- Disconnect ·
- the rod iotor hoses,
- the heater hoses on the engine,
- the carburettor heater hose from the 3 way
union near the scuttle.
- the petrol feed pipe,
- the Mostervoc vacuum pipe from the inlet
manifold.
- the w ires from : - the alternator,
- the oi l pressure switch,
- the ignition coil,
- the thermostatic connector,
- the starter rr.otor,
- the self disengaging fan
switch,
- the choke and throttle controls.
- Remove the radiator.
-Insert the master cylinder stopper rod 8.0803 F
and screw it in tight to prevent draining the
broke fluid system.
- Disconnect from the 4 way union :
- the broke fluid supply pipe,
- the rear broke supply pipes,
- Slacken the securing supports on the flexible
left and right broke hoses, on the front wing
valances.
- Disengage the hoses from the supports without
disconnecting them from the brakes.
504 W orkshop Monuol - Ref. 1212 E