PEUGEOT 504 Series 1970 Workshop Manual page 613

BODY BENCH
DESCRIPTION AND CHARACTERISTICS
504 .
COUPE CON VERT! BLE
EN S. ·1 28
+
128 bis
COMPOSI TION OF THE ASSEMBL Y
A • Sole plate for supports 8 • C and towers DZ
B - Supports for checking the front suspension crossmember holes.
C - Supports for checking the front main crossmember holes.
DZ - Telescopic towers with spacers for checking the upper front suspension mounting.
E - Cross piece for gouge F and supports G-H-
F - Gouge for checking the gearbox tunnel.
G - Supports for checking the front floor guide holes.
H - Supports for checking the posit ion of the one piece sides.
J -
Cross piece for checking the rear guide holes in the bulkhead.
K - Cross piece for sup ports M.
M - Supports for checking the rear front floo guide holes.
N - Cross piece for supports
P.
0
0 - Supports for checking the rear suspension crossmember mounting holes.
P - Supports for checking the position of the one piece sides.
Q •
Supports for checking the rear spring housings.
R - R.H. support for the rear floor.
S - L.H. support for the rear floor with centering for the fuel filler tube.
A
bis
E
bis
N
bis
u
v
w
} set of fourteen 20 mm shims
set of six
20
mm thick sole plates.
• No I onger manufactured .
WVIW. ~~lllC:J . OrG