PEUGEOT 504 Series 1970 Workshop Manual page 185

J
•
GEARBOX
RE-ASSEMBLY
- Install :
- Spacer G,
- A
new nut, using wrench
P.
T1ghten1ng torque: 40.00 ft.lbs (5.5 m.kg).
IN T ERMEDIATE GEARSHAFT
- Install the front and rear bearings, using drift
s .
- Pos ition the following ports :
- rear bearing outer race
1,
- reverse gear pinion 2,
- a new spring washer 3,
- a new snap ring
4.
- Engage the snap ring into its mounting groove,
using driver T .
- Check the snap ring for proper engagement,
using combination pliers.
WVIW. E. CJ llCJ .OrG