PEUGEOT 504 Series 1970 Workshop Manual page 597

/ '
BOD YWO RK - REAR PART
REPLACl~G
A WING
(by cutting away)
- Using a torch weld in successive strips insi-
de the boot panel and the wing (S)
- Braze the front port of the wing to the but·
tress fill ing the holes (r)
• To ensure the woterproofing run the braz ing :
1 • along the base of the water drip channel
protecting
it
and the wing with a strip of
damp asbestos (t).
2 • along the base of the front port of the
wing.
3 - along the rear bose of the wheel arch.
4
along the base of the boot panel.
5 along the upper angle of the wing.
6 7 - along the joint between the gusset
the wing and the boot panel.
FINI SHING
• F1n1sh the soldering on the upper port of the
panel by tinning if necessary.
PROT ECTION • SEALING
• App ly o strip of filler along the joint between
the bose of the wing and the one piece side
(u) from the inside.
WWW.
Ea~
lllC'.:l .orG
I
I