PEUGEOT 504 Series 1970 Workshop Manual page 24

3-72
ENGINE
DISMANTLING
I
If the liners and pistons are to be replaced, the
engine must be removed.
- Drain off the engine oil.
- Strip the engine to the extent shown opposite.
- withdraw the petrol pump plunger (1) .
On XM/KF and XN 2 engines : remove the
injection equipment (see pages 13).
Remove the cylinder head.
WARNING • Pivot the cylinder head so as not to
disturb the liners when removing it .
- Secure the liners, using the screws 8.0104 D.
Remove
· the cam followers and
set
them aside in the
order of removal.
- the distributor support,
- the distributor drive rod.
Remove :
· the oil sump and oil pump,
·the t iming housing
(place a block of wood between the crankshaft
and cylinder block, in order to lock the
crankshaft to remove the pulley nut (2) .
WVIW. E. CJ llCJ .OrG
Supersedes page 03 0 3 11) and 03 04( 1), c lass 1.
1212 E