PEUGEOT 504 Series 1970 Workshop Manual page 210

P R 0 PELLER SHAFT
REMOVAL
- Separate the differential from the connecting
tube.
- Move the differential rearwards and rest it on
a wooden block.
- Remove the spring located inside the propeller
shaft.
H.B.
·In order to be able to move the car freely,
the differential can be secured to the suspension
crossmember using two 204 cylindP.r hend ho/to;.
- Remove the four Allen screws securing the
connecting rod to the gearbox.
- Separate the tube from the gearbox .by approx.
20 mm.
- Insert the
p~opeller
shaft holding plate 8.04035
between them.
- Using two Allen screws M 10
X
150 secure this
plate to the tube lower port.
· lower the exhaust pipe downwards at the front.
- Separate the· propeller shaft from the gearbox.
- Bring the assembly connecting tube propeller
sha ft forward to withdraw it.
12 . 59
.._ ____________________________ ~--~--------------
.......
------------------------------------------..0
Supersedes sheet class 4, page 02 03 and 0204
504 Workshop Monuol - Ref. 1212E