PEUGEOT 504 Series 1970 Workshop Manual page 279

D IF FER E NTIAL
RE -ASSEMBLY - ADJUSTMENT
• Place micrometer on right-hand side plate
with dial indicator feeler on outside machined
surface of plate.
- Adjust dial indicator height so as to obtain o
reading of
"l"
and
"O"
for example.
- Place micrometer on machined surface of
tool
AZ
used as measuring surface .
- The displacement of the dial indicator needles
represents the height of the collar on plate.
Ex.:
Measurement on plate l .00
Measurement on measuring surface 7 .29
Height of collar 6.29
Compare :
- number obtained when measurement on housing
was carried out.
- the height of the collar.
- THE DIFFERENCE ROUNDED TO THE NEA -
REST 0 .05 mm REPRESENTS THE THICK-
NESS OF THE SHIMS TO BE INSTALLED
BETWEEN BEARING AND THRUST PLATE
(4th adjustment).
Ex.:
Number obtained with first measurement 6.40
He ight of coll or 6.29
Thickness of shims to be used 0.1 l
which means 0.10