PEUGEOT 504 Series 1970 Workshop Manual page 583

A
BODYW ORK - CENTRAL PART
REPLACING AH OUTER DOO R PAHEL
b
B
ALI HEMEHT AHO· ASSEMBL Y
• Fit the door to the car.
• Position ond hold the panel on the door using
mole grips. Aline it to obtoin a perfect posi-
tioning in relot1on to the adjacent ports.
· Remove the door.
• Spot weld (A) :
(a) at the level of the lock
{b) • at the level of the hinges
(c) • the lower edge
(d) • the top edge
NOTE - Use boll electrodes or a palette to
avoid marking the panel.
• Bend over and crimp the edges ( B)
· Wed
(e) and (f) • at the joint between window frame
and the upper port of the panel.
(g) • at the base of the rear port of the
crimp ng on the door panel.
• Smooth down the panel to eliminate the traces
of we lding.
PROTECTION AHO SEALING
· Ins ide the door :
(h) • Apply protective point at the lower
port of the crimping.
(i) • Apply o layer of soundproofing
in
the inner face of the pone
I.