PEUGEOT 504 Series 1970 Workshop Manual page 314

0
w
lj
::>
w
0.
REAR AXLE
SUSP ENSION ARMS
REFITTING
- All the parts must be perfectly clean and free
from defect
- Check that the rubber bushes are in perfect con·
d1t1on and, 1f necessary replace them (class 5,
page
16 21
and
16 22).
- Clamp the arm 1n a vice
- Secure the disc protector and the hub earner,
fitting new Blodor washers.
T ighten the Allen screws ta
'19
ft.lbs (4
m.kg)
- Fit the hub in the carrier using the bolt Cl and
the nut C2 as shown opposite
- Hold the nut C2 with a dO mm open end spanner
- Tighten the bolt Cl until the hub abuts on the
bearing.
- Remove the nut C2 and the bolt Cl.
· Fit the antiroll bar I ink on the arm using a new
Nyl stop nut. Do not t 1ghten yet.
- Place the arm in the yokes on the cross member
- Insert the rods
J
to hold 1t in place temporarily
504 Wor shop Monuo Ref 1'12 E
WWW.
Ea~
llC:l .orG