PEUGEOT 504 Series 1970 Workshop Manual page 347

u1r0
FRONT AXLE
TRIANGLE ARMS
. Grease the housing with ESSO MUL TIPUR-
POSE GREASE H .
. Pace the arm on the steering swivel boll
joint cone.
· Position the boll head.
· T ighten the boll head securing nut to 33 ft.lbd
(4.5 m.kg) using the castled socket F .
· Lock the boll head securing nut using the
punch P.
- Position the lower nylon cup, white, (10 mm
thick) on the boll head.
· Fit o new closing nut.
·Tighten this to 5.5 ft.lbs (9.75 m.kg) using
the socket head C or D.
· Move the arm around and reti ghten the nut to
the specified torque until the two half cups
ore correctly positioned.
'
I