PEUGEOT 504 Series 1970 Workshop Manual page 373

~JllG
STEER I NG GEAR
RE-ASSEMBLY . ADJUSTING
Mounting the flector
·Fit 4 new Blocfor washers and bolts, the heads
of the bolts towards the steering box.
· Position the plates on both sides of the flector
with the holes forming a cross.
·Secure the fleeter thus assembled to the pinion
flange.
·Centre the rack, in relation to the steering box,
to the •straight ahead• position.
- Fit the clamp to the fleeter using the reference
mark made whilst dismantling.
In the "straight ahead" pos1t1on the bore
et
the
collar bolt hole must
be
parallel to the rock.
The thrust faces of the pinion flange and the
collar should be in contact with flector through
the holes in the plates.
·Tighten the 4 nuts to
13
ft.lbs
(1.75
m.kg).
• Lock the bolts by spreading the threads using
a cold-chisel.