PEUGEOT 504 Series 1970 Workshop Manual page 572

0
w
~
::>
w
a.
g.70
HULL · FRONT PART
REPLACING A COMPLETE BUTTRESS OF THE FRONT FRAMEWORK
Welding (cont' d)
·With the assembly
{Al
- Fit and spot weld
(c) ·the lower cross piece on its supports
·Place and hold with mole gnps the front frame ·
work. Check its centering by taking 2 diagonal
readings between the front and rear fastening
points of the front os sembly D
=
1287
:t
2
· Spot weld
(d) ·the side brackets
(e ) - the framework panels
on the front ports of the wing valances
(f) · the buttresses
(g) ·the wing valances
to the lower brackets
(h) ·the lower cross piece
(i) ·the cross piece supports-to the lower port
of the front framework
(j) ·the front sole plate of the side member
(k) ·the bulkhead-front floor joint to the connec·
ting si demember.
· Remove the bolts, raise the hull (by the door
frames ). Remove the telescopic tower (new
buttress side).
·With the assembly
00
Spot weld :
(1) ·The buttress to the wing valance
- Torch weld
(m) • the buttress
(n) ·the connecting sidemember to the front
floor
(o) • the bottom of the sidemember and the floor
to the rear
port
of the connecting side-
member
- With the assembly
~
Spot weld .
(a') -the end of the buttress
504 ' # jorl.shoo Monuo • Ref 1212 E
WWW.
Ea~
lllC'.:l .orG