Table of Contents
Advertisement
w
lJ
:;:)
w
a.
STEERING GEAR
RE-ASSEMBLY
• ADJ USTING
G~J
11
·Fit the rock boot on the pinion side so thot the
lorger axis 1s perpendicular to the bearing foces
of the mounting flanges on the steering box on
the main
cross
member.
-
The prongs 1 on the clips must foce the lower
port of the steering box.
IMPORTANT
: the prongs of the clips ore shoped
1n
such o woy thot they
interlock
easily using o
poir of pliers.
Do not
attempt to
bend them
out
of
t heir
orig
ina
l
shape.
Pre-ad just
ment
of
the
pin ion
si
de track
rod
·Adjust the distance between the shoulders of
the yoke and boll joint housing to 180 mm
·Equalise
the distance between the shoulders
and the adjuster rod.
·The tightening of the two bolts 2 is effected
with the steering gear in position on the cor,
after
adjusting the toe in of the front wheels.
-
Fit the roe k boot on the opposite end to the
pinion, following the obove mentioned
instruc-
tions.
• Fit the one piece track rod to the rack.
·Position the track rod
in
line with the rock.
· Fit a
new
tab lock.
·Tighten the bolt to
33 ft.lb
s (4.5 m.kg).
•
Bend the tab up around t he
bolt
head.
504
Workshop Monuol - Ref.
1212 E
Hide quick links:
Advertisement
Table of Contents
